You must log in or # to comment.
Works the same as M-b for me (backwards-word)
Make sure your /etc/inputrc or ~/.inputrc contains
# mappings for Ctrl-left-arrow and Ctrl-right-arrow for word moving "\e[1;5C": forward-word "\e[1;5D": backward-word "\e[5C": forward-word "\e[5D": backward-word "\e\e[C": forward-word "\e\e[D": backward-word`Lemmy:
> meme with problem
> SolutionCommentMemeCommentCommentMemeQuestion
Others:
>meme with problem
>BotCommentCommentAwardsAwardsBotShitpostAwardsShitpost
I hope the formatting shows properly… And thanks for this 😁 now to update the .initrc on my laptop and VPSes
It would have been funnier if you put in “\e;D5c1-7” or whatever the fuck VT-100 gobbledegook
Commenting to save. Thank you!
Idk if you know but you van actually save a post or comment pressing the button “save” under it. It will appear in your profile in a section of saved stuff.
Didn’t know that. My lemmy app doesn’t have a comment save button.
Actually, most linux terminal allows you to change shortcut in terminal to just use ctrl-c and ctrl-v.
The one I use just wants me to do ctrl+shift+v
By default, yes, but most terminal allow you to just open the setting and change the keybinding. And even Ctrl-c will work as you expect, it will copy when text is selected, and terminate command otherwise.
Ctrl+shift+v is paste without formatting in most apps though, so kind of a good habit
If i knew it before, now my brain just knows that it need to press shift on the terminal
oh my i didnt know
We have the middle-mouse-button clipboard for this.
Ctrl+a - go to beginning of line (alpha? I dunno) Ctrl+e - go to (e)nd of the line alt+f - (f)orward one word alt+b - (b)ack one word
You might already know these but no one else has posted them on this thread yet. I work in both Linux and Mac a lot and this works for them. No idea about Windows I’m no longer forced to use it at work 🙂
Also
Ctrl + wto delete one word backwards (which is what OP wants to do).Edit: Nvm I misread the post, deleting is not what OP wants to do. Still gonna keep this because
Ctrl + wis easily the readline shortcut I use the most.While we’re at it:
Alt+ddeletes the next word.
If you use WSL (which you should), you have a normal Bash, so it works
The best part of Windows is the part that isn’t Windows lmao lawd I’m glad I don’t work for the federal government (exclusively Microsoft) anymore
fed detected
In a sane editor just press
b.Is Ctrl + ⬅️ for typing ‘b’ then?
No (although you can easily create such a key mapping if so inclined). To type b character one must first enter the so called Insert mode. Depending on where exactly you wish to type the character, you can enter the Insert mode by typing for example i, a, I, A, o or O.
It wasn’t a serious question 🙂
Sounds like you’re talking about good old vi or vim.
Why is that actually?
Because fuck you! That’s why!
Edit: serious answer, I’m pretty sure it’s outputting the key events to the terminal line.
Because terminal emulators are literally the old terminal emulators (ye oldy screens + keyboard combos that looked like a computer but were just IO) and everything modern they do is just a hack.
Terminals with screens? What’s all that newfangled shit?
Nah, whippersnapper, this tech goes all the way back to teletypes. You didn’t get a fancy-shmancy “screen;” instead, it printed out the results of your commands. On actual paper!
Seriously though, that’s why the device files for terminals in Linux are named
tty[$NUM]– “tty” is shorthand for “TeleTYpe.”I believe it’s also why really primitive programs can’t scroll up and do things like writing an entire screen worth of content in order to emulate interactivity (as opposed to seeking the cursor backwards and replacing only the parts the program wants to replace): they’re using a version of the control protocol so primitive that it didn’t have a function to go backwards because teletypes didn’t need it due to physical impossibility. (That’s my theory, anyway – I haven’t dug deep enough into the guts of TERMCAP etc. to be sure. I’m also not actually old enough to have experienced that stuff, despite my joke above.)
bdeleted by creator
It also works with Shift so you can highlight and select words at a time.
Hey, I actually knew that shortcut! But it never occurred to me that ctrl+arrow just moves the cursor without selecting anything.
wild stuff.
Ctrl+backspace to delete previous word.
Ctrl+delete to delete next work.
set -o viIdk about bash but at least in fish I can do alt + arrows to move the cursor by word, also alt + backspace works to delete whole words.
What happens to me is the opposite. I got used to Ctrl+w to delete a word in terminal and accidentally closed browser tabs many times while typing in them.
In any sane editor:
Save a file - CRTL-S
In VI:
-
Switch to command mode by pressing the Esc key.
-
Type : (colon). This will open the prompt bar in the bottom left corner of the window.
-
Type w after the colon and hit Enter.
In Emacs:
https://www.gnu.org/software/emacs/manual/html_node/emacs/Save-Commands.html
C-x C-s Save the current buffer to its file (save-buffer).
C-x s Save any or all buffers to their files (save-some-buffers).
M-~ Forget that the current buffer has been changed (not-modified). With prefix argument (C-u), mark the current buffer as changed.
C-x C-w Save the current buffer with a specified file name (write-file).
M-x set-visited-file-name Change the file name under which the current buffer will be saved.
When you wish to save the file and make your changes permanent, type C-x C-s (save-buffer). After saving is finished, C-x C-s displays a message like this:
Wrote /u/rms/gnu/gnu.tasks
If the current buffer is not modified (no changes have been made in it since the buffer was created or last saved), saving is not really done, because it would have no effect. Instead, C-x C-s displays a message like this in the echo area:
(No changes need to be saved) With a prefix argument, C-u C-x C-s, Emacs also marks the buffer to be backed up when the next save is done. See Backup Files.
The command C-x s (save-some-buffers) offers to save any or all modified buffers. It asks you what to do with each buffer. The possible responses are analogous to those of query-replace:
y SPC Save this buffer and ask about the rest of the buffers.
n DEL Don’t save this buffer, but ask about the rest of the buffers.
! Save this buffer and all the rest with no more questions.
q RET Terminate save-some-buffers without any more saving.
. Save this buffer, then exit save-some-buffers without even asking about other buffers.
C-r View the buffer that you are currently being asked about. When you exit View mode, you get back to save-some-buffers, which asks the question again.
C-f Exit save-some-buffers and visit the buffer that you are currently being asked about.
d Diff the buffer against its corresponding file, so you can see what changes you would be saving. This calls the command diff-buffer-with-file (see Comparing Files).
C-h Display a help message about these options.
wtf m8
-
Also in some Windows programs. Infuriating
More often it’s Ctrl + backspace that doesn’t work. Ctrl + <- works nearly everywhere.
Getting the little boxes when renaming files. Uuuuuuuuggghhh
i’ve noticed ctrl + backspace works in windows 11 where it didn’t work in 10
I hope you don’t expect that to convince me to upgrade. That doesn’t even make up for what they did to the taskbar.
That’s why my terminal is emacs
I think you mean OS
That’s why my terminal is OS
Emacs and bash use the same navigation shortcuts though, LOL.
Bold of you to assume that an Emacs user will have anything remotely resembling the default keymap by the time they’re proud enough to brag about it
Depends on the terminal. xfce4-terminal it works.
Works in the Cinnamon terminal, too.
And it works in QTerminal.
I’ve never used a distro that didn’t come with a sane default shell config to avoid this
