I am currently looking into upgrading storage for my homelab. The two routes I am looking at are grabbing a dell r730 or a disk array. They are both about the same price, but my major purchase concern is heat and noise. My office/homelab is in a 10x10 foot room. I have worked hard to get the sound floor at my desk to be around 44dB, and the temps to top off at 79f, 74 on a good day with the door open. Is a disk array going to add more heat and noise to the room than a dell r730 server running proxmox with trunas?

  • snekerpimp@lemmy.worldOP
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    as of right this moment I run an R430 1U dell server, which is a dual socket server with 4 3.5 drive bays up front, averages about 90w. Just being a 1U enclosure and having those tiny fans it tends to get loud. Was looking into a 3U disk shelf as well, but have seen 40mm fans on the back of them. I have too many 40mm fans as it is, I don’t need to add more with more noise. I know a 2U or 3U server enclosure would have larger fans and be quieter, and if I get the same generation or newer, use the same or less power.

    • __init__@programming.dev
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Oooh, I assumed a 3u shelf would have bigger fans, but I just realized I never actually saw any fans inside that thing. Reading more about it now, apparently it has some kind of nonstandard squirrel cage fans? Damn.

      • snekerpimp@lemmy.worldOP
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        This is why I’m concerned about noise. I swapped the 40mm fans I have in my switches to noctuas, helped a bunch. Would hate to have this disk shelf I grab to be louder than my switches.