• Dave@lemmy.nz
    link
    fedilink
    arrow-up
    1
    ·
    2 months ago

    Yes framework expansion card slots are just a bunch of USBC ports, but seems a waste not to get the proper expansion card that slots nicely into the laptop looking like it was built in instead of a boring regular dongle.

    I checked out the app you suggested, not entirely sure what I’m doing but the app seems happy with my wifi. My network is strong, others from neighbours are all pretty weak.

    Unfortunately I need 2.4Ghz wifi for a bunch of home automation things.

      • Dave@lemmy.nz
        link
        fedilink
        arrow-up
        1
        ·
        2 months ago

        Some, at much lower strengths. Most of the graph is covered though, and the access point is using the recommended channel. It has band steering so automatically changes the channel to optimise.

        • Toes♀@ani.social
          link
          fedilink
          arrow-up
          2
          ·
          2 months ago

          So there’s a few issues at play.

          That automatic channel changing feature is more harmful than helpful in this context.

          If you’re able to lock it onto an entirely empty channel it’ll help. Try for channel 106

          • Dave@lemmy.nz
            link
            fedilink
            arrow-up
            1
            ·
            2 months ago

            I have the ISP router and two AmpliFi mesh access points to provide the wifi. The ISP router also has a wifi network, this is the 2.4Ghz one for the IoT devices.

            When I try to change the channel for the access points, I don’t get the option for channel 106. I only get the option for 36, 40, 44, 48, 149, 153, 157, 161.

            I also noticed that I had missed that there’s a little button in the wifi scanning app to toggle between 2.4Ghz and 5Ghz. I noticed if I change the channel, a whole bunch of hidden networks come with it. I think this must be related to the mesh network, it’s a lot of networks though! 8 or 9 of them, two separate ones with the same network name (I presume the two access points), and the rest all marked as hidden.

            In the app, what does the width of the bar represent? It says something like Wifi_Network 157 (155) and has a big flat top that seems to cover a range. Is that indicating that nearby channels can interfere with each other?

            • Toes♀@ani.social
              link
              fedilink
              arrow-up
              2
              ·
              2 months ago

              Another thought of mine is that wireless devices can perform poorly if they are too close to the AP. (Like less than a meter)

              I don’t get the option for channel 106

              Assuming you’re not in a country that blocks the use of those channels. There is a bunch of corner cutting gear out there that won’t let you use a big chunk of the 5ghz spectrum.

              If you’re shopping for new stuff look for gear that supports DFS channels in the future.

              …and two AmpliFi mesh access points to provide the wifi.

              Mesh networks can perform poorly for applications that are sensitive to latency and jitter. (Such as steam’s remote play)

              a whole bunch of hidden networks come with it. I think this must be related to the mesh network, it’s a lot of networks though! 8 or 9 of them

              It’s possible that some of those are related. My assumption is that there’s interference from your own devices and the neighbours. But a mesh network isn’t an ideal environment.

              In the app, what does the width of the bar represent? It says something like Wifi_Network 157 (155) and has a big flat top that seems to cover a range.

              This is indicative of the channel width. It’s a common occurrence to have a network use overlapping channels to increase performance.

              The take away is that not all channels are isolated from one another and it’s possible for a network to have many of them bonded together.

              With Wifi_Network 157 (155). It’s indicating that the network’s real channel 155 with a 80mhz channel width. But it’s configured to channel 157 for its beacon as not all devices will connect in 80mhz mode. 157 represents the 20mhz channel it’s configured to camp on.

              Is that indicating that nearby channels can interfere with each other?

              Yes.

              Channel chart source: https://readus247.com/best-5ghz-channel/

              • Dave@lemmy.nz
                link
                fedilink
                arrow-up
                1
                ·
                2 months ago

                Wow thanks for all the info!

                Another thought of mine is that wireless devices can perform poorly if they are too close to the AP. (Like less than a meter)

                Huh, I wouldn’t have thought of that. I’m pretty close! I’ll try moving it a bit further away.

                Mesh networks can perform poorly for applications that are sensitive to latency and jitter. (Such as steam’s remote play)

                Last night it was much more stable, I didn’t have any Steam dropouts (only the BG3 crashes which seem pretty common in Act 3 after having none until then, and I’m not the only one). But I do have the option to create a separate non-mesh network from the AP if I need to. If I have further trouble I’ll give that a go.

                It’s possible that some of those are related. My assumption is that there’s interference from your own devices and the neighbours. But a mesh network isn’t an ideal environment.

                When I changed the channel, the whole lot came with it, hence my assumption.

                • Toes♀@ani.social
                  link
                  fedilink
                  arrow-up
                  2
                  ·
                  2 months ago

                  But I do have the option to create a separate non-mesh network from the AP

                  Channel 165 tends to be empty if you do try that.

                  If your core problem is bg3 itself crashing then I’ve gone on a silly tangent here.

                  You might find act 3 is more stable in dx11 mode assuming proton is up for the challenge.

                  • Dave@lemmy.nz
                    link
                    fedilink
                    arrow-up
                    2
                    ·
                    2 months ago

                    Two issues here: Issue one, BG3 itself crashes all the time. This most likely isn’t linux related, because it’s been rock solid up to Act 3 and everyone across all platforms complains about all the crashing in Act 3. Solution - quick save all the time.

                    Issue two, sometimes Steam Remote Play will disconnect from the game. The game continues to play on the remote PC but the connection is lost, and it won’t let me reconnect (which is something Steam normally lets you do, but this might be because it’s a non-steam game).

                    Your info on wifi networks to prevent the connection dropping has definitely been relevant and helpful!