I have to somewhat agree with the author. My experience and understanding of depression is that it is more of a (sometimes very persistent) symptom than an underlying cause. Ideally, we would all have the guidance to deal with depressing scenarios, but similar to dissociation during trauma, our mind defaults back to disconnection to limit the pain.
I’m not saying this is every case, but I do think as a society we could view depression more as a coping strategy, and try to replace it with healthier practices. After time, it takes more time and effort and support to replace those coping strategies, but that is essentially what psychotherapy does.
I think too often in the modern world people tend to just shrug and say “this is who I am,” instead of trying to improve their coping skills and quality of life. Like another commentor mentions, this becomes a feedback loop of depression feeding depression and takes immense support and effort to curve and should absolutely not be shamed.
Spot on. It’s my primary working surface right now and will be mostly for ripping when I have a full bench. Sitting on it, my weight provides the stability, but I can pick it up and take it outside or anywhere.
I’ll use the joiners mallet to knock together joints and to motivate my chisel.
Yeah it’s convenient for some things, but not ideal for others. I might modify it by putting pegs into each leg to hold them in better, because the actual joints arent that good. Besides adding a crochet hook, some people add an attachment to hang down from the edge with the crochet hook to support longer boards with pegs, but I won’t know if that’s necessary until I use it more. The holdfasts dont grip well because it is so shallow, so I’m going to add some scratches to the holdfasts to see if the texture gives some better grip.
I’ll also add a couple more holdfast holes somewhere in th middle for sawing. Near the end of the bench where they are now, the saw sometimes bumps the leg that is protruding outward.
It turned out fantastic either way, and I don’t think anyone will turn you into the woood police.
Yeah, it’s surprising how little information there is to be found on how that was traditionally attached prior to hardware. I thought wood pegs and holes might work but havent tried it yet. I saw one design that had the legs go up flush to the table top and the top was notched and dropped into the legs.
This might be a dumb question, but how did you attach the top to the legs/frame? With wood pegs and holes?
Follow up question, what do you use for an abrasive fluid? I’m pretty new to sharpening and just bought diamond stones and lapping fluid, but the fluid is semi-expensive. I’ve seen about anything from just water, Windex, Krud Cleaner, and then all sorts of replies saying that each of those wreck the stone in some way. Is there a cheap alternative that you use, or should I just keep buying the lapping fluid?
Depends, am I a horse-sized duck? I might have some people to fight
That’s a fair point. I guess only one or two I knew said they didn’t use it because of the aluminum, but I didn’t get to ask more about it.
I have been listening to maybe a dozen of their podcast episodes and find them pretty interesting. I tried a few other ones but they seem to have the right angle and speed that I’m interested in. Mike and Josh really get into some more philosophical aspects that is promoting a lot of introspection in general. I’ll definitely need to check out that binding; thanks for the suggestion.
Homework actually 😅. After a couple of hours, they all start to sound like the cantina song on Star Wars
They probably love the shear speed of it
Pretty amped? Probably said “Ohm my God!”
Did you say… an orange and black box?
Must have had to shell out a lot for that
It looks like it tells you when a dark roast becomes light
Yeah I see that about the chuck now. And not all of the listings show what chuck it has. The website looks like it has a few good things to pick through but the photo of 11 hand braces with the caption “some are sold” just made me chuckle.
I was expecting “because it was letting its fillings out”
I haven’t come across using Windex, but I guess it’s worth a try.
I see the Lee Valley one and yeah it’s still kind of expensive. There are quite a few on eBay that are affordable. I’ll have to check out the chuck situation on it though.
Thanks again for you insight.
Thank you that’s reassuring. The chisels say “Hardened, tempered chrome carbon-steel” but not impulse, so I think they’ll be fine. The other thing I’m trying to find is a manual hand brace drill but the only new one I could find was from France and about $160. I’m thinking of just finding an okay one on eBay and seeing how it does.
If you have any other suggestions for whetstone liquid or wood glue, it would definitely save me some searches.
That’s weird. Mine is loading posts from as recent as 2 min ago and I’m post from the app now.