I have the Mega Drive gamepad variation pictured in this article, where the d-pad is connected to a plastic circular piece on the back of the PCB where it triggers 4 rubber buttons.
But the down direction is very unresponsive. I’ve cleaned it well in the hopes that sticky plastic was the cause, but it wasn’t.
Any tips? Replacement rubbers, a piece of padding maybe?
4 rubber buttons.
The coating of those buttons that contact the PCB isn’t really rubber.
I’ve cleaned it well in the hopes that sticky plastic was the cause, but it wasn’t.
Between cleaning and years of wear, the conductive coating is likely gone. To replace that conductive coating you might have success with at Electric Paint Pen. Probably carbon based for those pads. Something like this.
That looks interesting and worth trying. I’ll have a look to see if I can find anything like that locally
To test it, you could try rubbing the pad with a graphite pencil. Won’t be as good or a permanent fix, but if it works then you will know what the problem is.
I like this whole chain. I don’t have a horse in the race. I don’t have my old genesis anymore. And I don’t know the solutions, but I do like the idea of a community coming together to help each other out with this stuff.
It’s good.
I’ve never tried this personally, but I’ve seen a lot of articles and videos where they say the conductive coating under the buttons can wear out and cause them to become unresponsive and they were able to fix it by applying some graphite dry lubricant
Again though, I’ve never tried it myself so you may want to do your own research first
I ended up applying something called Liquiwire, which seems to work well so far! I can finally play The Lion King properly again _.
The PCB is probably shedding at this point, so the contacts have a gap. You could try putting a nub of something in there for added pressure, but it surely still won’t feel right while playing.
Is buying a used controller out of the question?
Is buying a used controller out of the question?
The backup plan is to do either that or get an 8bitdo M30 with a retro receiver!
