• VeganCheesecake@lemmy.blahaj.zone
    link
    fedilink
    arrow-up
    0
    ·
    2 months ago

    I have run qemu successfully on a mobile Kaby Lake processor. Was a 8th gen i5 with 4c/8t, though, and the system had 32 gigs of Memory.

    With that setup, I ran Windows to use Lightroom, went pretty smoothly.

    So, like, the architecture can do it, but with 2c/4t and almost no Memory, you probably can’t do much on the host OS while running the emulator, and whatever you emulate probably also can’t be very heavy.

  • Toes♀@ani.social
    link
    fedilink
    arrow-up
    0
    ·
    2 months ago

    What are you planning to do with the vm?

    If your intention is to run anything significant like multiple instances of windows or Linux then the answer is no. Ideally you’d have at least 8GB of ram if you just want one VM.

    You’ll need to confirm if virtualization is enabled in the bios.

    I would suggest replacing the os with something lighter like xubuntu. http://xubuntu.org/

      • nublug@piefed.blahaj.zone
        link
        fedilink
        English
        arrow-up
        0
        ·
        2 months ago

        install mx on the bare metal instead of a vm of it on win10, you’ll prolly even be able to run a win10 vm with better performance than native. also use zram.

          • Danitos@reddthat.com
            link
            fedilink
            arrow-up
            0
            ·
            2 months ago

            Directly on the hardware, not virtualized in a VM.

            I second that option. 4 GB of RAM is not enough for Windows 10. Install Linux, and if you need Windows-specific software use then with a VM; I used to do that and used Windows 7 instead of 10 as it is far lighter. This should improve the overall experience IMO.

            • LoveEspresso@cafe.coffee-break.ccOP
              link
              fedilink
              English
              arrow-up
              0
              ·
              2 months ago

              I understand what you say. This is my brother’s laptop, and he doesn’t have the patience to learn Linux. I believe this computer is not going to work on windows for long. When windows stop functioning on this laptop, l’d boot MX Linux straightaway. There should be no problem in creating a VM then I suppose ?

              • Danitos@reddthat.com
                link
                fedilink
                arrow-up
                0
                ·
                2 months ago

                There should be no problem I think, but will likely have non-optimal performance. Only was to know for sure is trying. Note you’ll need to enable options in your BIOS.

                I insist on the Linux migration. That machine is underspecd for 2026 Windows, plus Windows 10 doesn’t receive security parches. Begineer-friendly distro are very easy to use, and you can try a dual boot setup to see if he can get used to it. For begineers I usually go for Linux Mint, or ZorinOS.

                Maybe another option is see if you can upgrade a little bit the RAM.

  • adarza@lemmy.ca
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    i see a ram upgrade in your future. 4gb is barely enough for win10 to boot and run a browser or something. will need more on top of that for what you’re gonna be running with qemu. other than that, as long as you have virtualization enabled, the rest is ‘good enough’

  • stoy@lemmy.zip
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    Back in the early 2000s I acquired a copy of VMWare Workstation 5, I ran VMs on an HP dv6000 with a Turion CPU and a gig of RAM.

    With XP it was fine, I even ran a Windows 2003 server VM with a domain controller on it.

    Those days are two decades gone, you will need a minimum of 16GB on a normal computer, and I’d recommend 32GB to give yourself headroom for VMs these days.

    It sucks, absolutely, but it is the current reality.

    What do you want to do with the VM?

    • ChaoticNeutralCzech@feddit.org
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 months ago

      Damn, 1 GB of RAM in cca 2003? That was really a high-end machine. But 4 GB is enough for a Linux computer now with not too many browser tabs or workflows with large files.

      • stoy@lemmy.zip
        link
        fedilink
        English
        arrow-up
        0
        ·
        2 months ago

        That is what you will run on it, yes, what are you looking to do with it?

          • ChaoticNeutralCzech@feddit.org
            link
            fedilink
            English
            arrow-up
            0
            ·
            edit-2
            2 months ago

            VMs with desktop Linux or Android are technically possible but you won’t enjoy the performance. Better dual-boot with those specs.

          • stoy@lemmy.zip
            link
            fedilink
            English
            arrow-up
            0
            ·
            2 months ago

            Alright, just a heads up with the specs you posted, you may be rather disappointed with the performance of the VM.

            Do you have any budget for computer hardware?

            • LoveEspresso@cafe.coffee-break.ccOP
              link
              fedilink
              English
              arrow-up
              0
              ·
              2 months ago

              I’d start my learning journey with what l have in hand.

              Right now, l’ve just installed a WSL. I’ve installed fish and zsh. I would have loved to install MX Linux, but l better stick with Ubuntu for the time being. My next step would be setting up vs code, and starting off my journey with git.

      • Beangut@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        2 months ago

        I would recommend dual booting/switching to linux and running android via linux.

        Memory is probably your biggest bottle neck here so setting up a bit of extra swap for Linux will be worthwhile until you can upgrade

  • Thorry@feddit.org
    link
    fedilink
    arrow-up
    0
    ·
    2 months ago

    It’s a really old cpu that was pretty slow to begin with. But it does have the required bits for virtualization, so it should work just fine.

    It would be terribly slow tho, slower still than the system already is. And with only 4GB of memory I’m amazed it even runs Windows 10. It would run out of memory as soon as you do just about anything. If you can get some more memory into the thing, it would work better.

    The info says desktop? But that’s a low end mobile cpu in there, 15W TDP, optimized to be cheap and have a good battery life. The downside is the performance sucks.

    • T156@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 months ago

      RAM is probably the biggest killer for it right now. The other specs are still viable enough for most basic usage.

      The info says desktop? But that’s a low end mobile cpu in there, 15W TDP, optimized to be cheap and have a good battery life. The downside is the performance sucks.

      Might be one of those all-in-one-systems where they put laptop hardware into a screen.

  • FiniteBanjo@feddit.online
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    The CPU is good

    The GPU is terrible

    It has 4GB of RAM which is about as low as a modern system can go, speed of ram is unknown

    It’s got a half Tera of SSD which is cool and a full Tera of HDD which is good for storage which doesn’t need to be accessed very quickly

    I say maybe? QEMU should be able to run on just about anything that supports virtualization in the motherboard’s BIOS settings.

  • infinitevalence@discuss.online
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    Depending on what you want to do, yes this is fine for running VMs on. If you are just spinning up some containers or a lightweight VM to host something its fine.

  • ChaoticNeutralCzech@feddit.org
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    Your GPU has 128 MB of memory? What for? Mine just pushes framebuffer contents outta the VGA and DVI-D ports, with some features like I²C to determine supported resolutions and VSYNC to prevent tearing.