Hello,
Bought a spare super cheap used 3TB drive a year ago, and just figured out it’s not a SATA but a SAS drive.
How fucked am I? What can I do more than using it as a paperweight?
Cheers!
Why buy a used drive? Save $12? F that.
I’ve gotten 3 drives from serverpartdeals, an 18 and a pair of 22s. They were $220, about half price.
I don’t know where you live but I got the drive for 30€ including shipping, a new drive is over 100€…
And then two years down the line you lose all the data - the pictures, the savegames, the porn collection. Drives are the one thing that shouldn’t be bought used
I learned the hard way when the cheap PSU blew up and took with it the mobo, my drive and my backup drive. That was the year 2000 or 2001.
Since then I do have a good backup strategy (with most important stuff on amazon glacier).
So you learned the hard way losing your porn stash 😉 ?
Jk, and the drive is not for important stuff.
PSU you is the other part you don’t want to cheap out on… Guess you got two lessons in one there.
Yeah, for sure. To be totally fair I probably got even more lessons out of it as I upgraded my SOs Duron 650 to an Athlon (so new mobo) and that was what blew up the chep PSU I guess…
Usually I now go 750-900w platinum just because it’s so nice when the fan doesn’t start before 400 watts (and it heats less ofc).
A lot of people learn this lesson sadly. It isn’t “sexy” to brag that you have a gold / platinum rated high quality PSU. People would rather add a “Ti” or a “10” to their graphics card and then lose it all when it goes. Same reason why I have an UPS for home PC - sure, overvoltage, undervoltage, electrical noise probably won’t harm the PC. But why risk it? Also having a battery to save your shit, or buy more electricity online when you run out on a prepaid meter is cool (speaking from experience, happened to me like 10 times already lol)
I salvaged an 18 year old WD hard disk from a pentium IV system.
It works to this day in my retro gaming machine lol
Look, i’m buying two hard drives no matter what to anticipate a drive failure. In that case, if i’m anticipating a failure anyway, might as well buy them second-hand and, yes, save a ton of money.
The key is to look for a CrystalDiskInfo screenshot in the ad, which is indicative of a serious seller and also lets you know the drive’s condition. If you buy from a professional, you may get a warranty.
Not if you have a proper backup plan.
I have about 200ish TB or about 24 drives and 3 of them failed all are used. I have a solid backup plan so no issues with failing drives. Saves me roughly 100-200 a drive.
New drives have infant mortality as well. An inverse bell curve would be the distribution.
Buy a cheap (used?) SAS controller. No big deal.
On ebay.fr they are like the price of the drive (around 25€ with shipping) :-(
Congrats on the new paper weight!
What you do is to look on the local used hardware sites, search for server, fet a cheap one with SAS interfaces, and now you have the start of a homelab.
Good idea, but what am I going to do with my thinkcentres 😁
Use them as clients in your homelab?
Connot have too many computers!
Yust buy a SAS controller (with cables), they are used pretty cheap.
On ebay.fr they are like the price of the drive (around 25€ with shipping) :-(
You can get a SAS USB external enclosure but they’re in the $100 range, probably not worth it for 3TB.
For internal use, you can get a used PCIe SAS Host Bus Adapter fairly cheap BUT you need to do some research. Before you buy one you should confirm that there is a driver for the OS that you are using and that it is supported on your processor/socket/chipset. These cards are server hardware - many of them are not supported by Windows and/or are not compatible with consumer motherboards & CPUs.
This is all assuming it’s a spinning disk and not an SSD, so ignore me if that’s the case:
Given SAS drives are usually used in data centre storage array applications and 3TB disks have been kinda small for that use case for a fair while, there’s a fairly high chance it was in heavy use for a good number of years. I’d bet it’s probably well on its way to being a paperweight regardless of your connectivity situation.
If you do get it hooked up, don’t store anything on it you wouldn’t be okay losing.
Yep spinning rust.
Wanted a scratch disk to aggregate all my sensitive information thats scattered and duplicated on smaller disks and thumb drives. Would probably keep it as an ultimate backup too (I got a real backup).
My thinking was that usually those disks are swapped out after 5 years when failure rates starts to creep up, but there’s still is some life left, largely enough for some fun.
SMART will tell you how many hours it’s been running
If I get it up and running ^^ !
You can get a used sas controller for cheap in most cases. Or try your luck with the generic stuff on Amazon.
The search brings up these scary words. It says you are 100% fucked.
At the same time, I see those cheap ass converters on Amazon >.> I have never tried one.
You can adapt SATA drives to an SAS controller, but you cannot adapt SAS drives to a SATA controller.
Yeah I’m gonna put my chips on the side of “these 8 dollar converters won’t work”
But maybe OP is brave idk
Ya maybe I’ll sit this one out 😁
Thanks! Yeah looks like it’s only the other way around.
I’ve seen SAS-SATA adapters for sale online. I got a 120GB used SAS, and it’s cheaper to buy another drive than to order the adapter.
Those adapters only work for plugging SATA drives into SAS controllers. You can’t use an adapter to plug a SAS drive into a SATA port
Well sometimes it can, it seems.
I’ll try to be back and tell :-)
No, they can’t. You need a SAS controller for a SAS drive, there is no way around it
Haven’t tried it myself, but there is cheap converters available on AliExpress:
https://a.aliexpress.com/_EwYtdeV
Might be worth it to avoid using it as a paperweight?
The link in Sanctus post says its SAS to SATA but the other way around doesn’t work for cheap converters 😞
there is cheap controllers as well btw:
https://a.aliexpress.com/_ExfUSap
lots of cheap electronics for all your needs over there :)
Ha ha yes my home is filled with unsuspectedly good stuff from aliexpress 😅
sorry if I misunderstood, but wasn’t your drive sas, an you needed to go to sata connections? this does that.
sas hdd => sata controller connetions
That’s exactly what I’d like to find, but you cannot, it seems, connect a SAS disk to a SATA slot on the mobo, only the other way around, with this adapter.
The comments also seems to say exactly that (you have to put 4 or 5 stars to comment, so that’s a useless measure, gotta read those translated comments).
you can, if you read my edited post, as long as the SATA logo is present on the label of the sas drive
as mentioned in the description of the product
Thank you!
Mine is suspiciously looking like yours 😁 but Dell, and without the sticker…
Is it just a Dell rebranded Seagate? I mean Dell doesn’t make drives right? And the serial takes me right to segate drives who are compatible s-ata.
Guess I’ll gamble a couple of € to see 😁
No worries, however I cannot see the SATA marking on yours, just the SAS, or perhaps I am blind, changed contact model today…but please double check before ordering.
And yes, Dell does not manufacture hard drives, so it’s almost 100% a OEM rebranding.
if however, it is this drive it should support SATA
https://www.minitool.com/backup-tips/sas-hard-drive.html?amp
I’ll get the converter, I’ll let you know how it pans out, and a huge thank you!!
Dell drives are rebranded Seagates, however the firmware is slightly modified so the bios recognizes it as a Dell branded drive. Openmanage will throw an error if you use a different drive (though aside from that everything will work fine)
Thanks! Crossing my fingers 😁
